Home/SVG design library/Cards and envelopes SVG templates/Seed packet envelope SVG: free cut file

Seed packet envelope SVG

Free SVG · No account needed

Finished size 60 × 95 mm (2⅜ × 3¾ in)

The other formats are made in your browser, at the same size; nothing is uploaded. The DXF puts the fold lines on a layer of their own; the PDF prints them black, like the cut lines. Either way, set them to Score before you cut.

Yes, you can sell what you make →

Seed packet envelope, 60 × 95 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Cut size: 114 × 228 mm (4½ × 9 in)
Size with margin: 114 × 228 mm (4½ × 9 in)
Shapes: 1
Layers: 2

What you need

Cardstock: see paper and card weights for what holds a fold
A scoring stylus or scoring wheel for the fold lines
Glue or double-sided tape for any joins

Fit it to your blank →

What is in the SVG

cut outlines; score guides. The preview shows the shapes in the file; the drawing beside the size shows the folded shape. It is not a photo of a finished project.

Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Keep the cut outline and score guide groups separate.
Set the thin rust fold lines to Score; the color alone won’t do it.
Fold the panels at their guides and check the closure before joining the final seam.

Need another size? Resize the SVG, or check it in the SVG checker. Then set the thin rust fold lines to Score in your software.

Download the full folded card and envelope SVG templates when you need the matching designs.

How it goes together

1. Cut and score
Cut out the shape and score the four lines around the 60 × 95 mm (2⅜ × 3¾ in) middle. Each line runs straight between two corners of the outline, where the flaps meet.
2. Fold in the sides
Fold the two side flaps in over the middle.
3. Glue the bottom flap
Fold the bottom flap up and glue it only where it lies over the side flaps (striped), so the pocket stays open at the top.
4. Close the top
Slide your card in, fold the top flap down and seal it with glue, tape or a sticker. Closed, it is 60 × 95 mm (2⅜ × 3¾ in).