Free SVG · No account needed
The hole for the thread or ribbon is 4 mm across.
Slide the starred tree down onto the plain one, slot into slot, until their feet are level: the two cross at right angles, 70 mm across each way and 124 mm tall with the star.
The other formats are made in your browser, at the same size; nothing is uploaded.
Yes, you can sell what you make →
Two flat trees that slot together at right angles into a tree that stands out in 3D, 70 mm across each way. The starred tree is slotted up from its trunk and hangs from a 4 mm hole in the star; the plain tree is slotted down from its tip.
starred tree; plain tree. The preview shows the shapes in the file. It is not a photo of a finished project.
Material, machine settings and any wording are yours to choose.
Need another size? Resize the SVG, or check it in the SVG checker.
Download the full winter ornament SVG pack when you need the matching designs.
Cut both trees from green card, in one shade or two. The starred tree is slotted up from the foot of its trunk and the plain tree down from its tip; each slot is 0.8 mm wide, and its mouth opens out to start the other tree. If you resize, resize both together. The slots change with them (0.4 mm wide at 50%), so cut a test slot in a scrap of your card first and check that a strip of the same card slides in without bending.
Hold the plain tree upright. Lower the starred tree onto it from above, slot into slot, until the two feet are level. Each slot runs to the middle of its tree, with 1 mm to spare where they meet, so the trees seat all the way.
Turn the trees until they cross at right angles, so the four wings sit evenly. Tie a thread through the 4 mm hole in the star to hang it. If the trees sit loose, a dot of glue where the slots meet holds them square.
78 × 86 mm (3⅛ × 3⅜ in) put together
SVG · PNG · DXF · PDF · No account
Two flat five-point stars that slot together at right angles into a star that stands out in 3D, 78 mm across each way. The hanging star is slotted up from the notch between its lower points and hangs from a 4 mm hole in the loop above its top point; the plain star is slotted down from its top point.
78 × 100 mm (3⅛ × 3⅞ in) put together
SVG · PNG · DXF · PDF · No account
Two flat six-arm snowflakes that slot together at right angles into a snowflake that stands out in 3D, 78 mm across each way. The hanging snowflake is slotted up from its bottom arm and hangs from a 4 mm hole in the loop above its top arm; the plain one is slotted down from its top arm.
78 × 95 mm (3⅛ × 3¾ in) put together
SVG · PNG · DXF · PDF · No account
Two flat discs, each with a cap and six star-shaped windows, that slot together at right angles into a ball that stands out in 3D, 78 mm across each way. The hanging disc is slotted up from its bottom edge and hangs from a 4 mm hole in the loop above its cap; the plain disc is slotted down from the top of its cap.
Want another format? Convert the SVG to DXF or make a PNG preview. It happens in your browser; nothing is uploaded.
EveryCutFile