May we count your visit with Google Analytics? It uses cookies and sends visit data to Google. You can change this any time under Cookie choices. Privacy
The other formats are made in your browser, at the same size; nothing is uploaded. The DXF puts the fold lines on a layer of their own; the PDF prints them black, like the cut lines. Either way, set them to Score before you cut.
Gable gift carton, 75 × 45 mm. Fold four body panels into a tube and join the side tab. Close the short bottom flaps with a separate backing square. Bring the two broad top flaps together over the triangular ends; glue or clip the roof seam. No handle or locking catch is supplied.
Blue lines are slits: cut them through the sheet. Red lines are folds: set them to Score, so the machine creases them instead of cutting.
cut outlines; cut slits; score guides. The preview shows the shapes in the file; the drawing beside the size shows the folded shape. It is not a photo of a finished project.
Fold four body panels into a tube and join the side tab. Close the short bottom flaps with a separate backing square. Bring the two broad top flaps together over the triangular ends; glue or clip the roof seam. No handle or locking catch is supplied.
Keep the cut outline and score guide groups separate.
Set the thin rust fold lines to Score; the color alone won’t do it.
Fold the panels at their guides and check the closure before joining the final seam.
Cut out the net, cut the slits and score every line: four walls (75, 45, 75 and 45 mm wide, 65 mm tall), an 8 mm side tab (striped), two roof panels, two triangle ends and four bottom flaps.
2. Glue the side tab
Fold the walls round into a tube and glue the side tab inside the edge of wall 1.
3. Close the bottom and the roof
Fold the bottom flaps in over a square of card cut to fit (it is not in the file) and glue them to it. Fold the triangle ends in, bring the two roof panels together over them and glue or clip the seam at the top.
Scoring by hand? Lay a ruler at 75 mm, 120 mm, 195 mm and 240 mm from the left edge, and at 34 mm and 99 mm from the top edge.
Cube favor glue-flap box, 45 × 45 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
Tall favor glue-flap box, 35 × 80 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
Tea sachet glue-flap box, 65 × 85 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
EveryCutFile
