May we count your visit with Google Analytics? It uses cookies and sends visit data to Google. You can change this any time under Cookie choices. Privacy
The other formats are made in your browser, at the same size; nothing is uploaded. The DXF puts the fold lines on a layer of their own; the PDF prints them black, like the cut lines. Either way, set them to Score before you cut.
cut outlines; score guides. The preview shows the shapes in the file; the drawing beside the size shows the folded shape. It is not a photo of a finished project.
Resize matching pieces together so they still fit. Material, machine settings and any wording are yours to choose.
Fold both trays at their score guides.
Join the corner seams with separate backing strips.
Place the shallow lid over the base; adjust clearance before making another size.
Cut both pieces and score the lines around each base: the base is 80 × 60 mm (3⅛ × 2⅜ in) with 35 mm walls, the lid 82 × 62 mm (3¼ × 2½ in) with 15 mm walls.
2. Fold the walls up
Fold the walls of each piece up so they stand square to the base.
3. Join the corners
There are no glue tabs: tape each corner seam from outside, or glue a narrow strip of card behind it.
4. Put the lid on
The lid is 2 mm wider and deeper than the base, so it slides on; allow a little more for thick card.
Cube favor glue-flap box, 45 × 45 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
Tall favor glue-flap box, 35 × 80 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
Tea sachet glue-flap box, 65 × 85 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
EveryCutFile
