May we count your visit with Google Analytics? It uses cookies and sends visit data to Google. You can change this any time under Cookie choices. Privacy
The other formats are made in your browser, at the same size; nothing is uploaded. The DXF puts the fold lines on a layer of their own; the PDF prints them black, like the cut lines. Either way, set them to Score before you cut.
Square gift envelope box, 80 × 80 mm. Fold the side flaps inward, then the bottom flap; the flaps meet edge to edge without overlapping, so tape the seams. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.
cut outlines; score guides. The preview shows the shapes in the file; the drawing beside the size shows the folded shape. It is not a photo of a finished project.
Fold the side flaps inward, then the bottom flap; the flaps meet edge to edge without overlapping, so tape the seams. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.
Keep the cut outline and score guide groups separate.
Set the thin rust fold lines to Score; the color alone won’t do it.
Fold the panels at their guides and check the closure before joining the final seam.
Cut out the shape and score the four lines around the 80 × 80 mm (3⅛ × 3⅛ in) middle. Each line runs straight between two corners of the outline, where the flaps meet.
2. Fold in the sides
Fold the two side flaps in over the middle.
3. Tape the bottom flap
Fold the bottom flap up. Its edges meet the side flaps without overlapping, so join each seam with a strip of tape.
4. Close the top
Slide your card in, fold the top flap down and seal it with glue, tape or a sticker. Closed, it is 80 × 80 mm (3⅛ × 3⅛ in).
Cube favor glue-flap box, 45 × 45 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
Tall favor glue-flap box, 35 × 80 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
Tea sachet glue-flap box, 65 × 85 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.
EveryCutFile
