SVG design library: page 5

A grinning elf with pointed ears and rosy cheeks, in a green hat that flops over with a gold bell and a red zigzag cuff.

A polar bear standing side-on, its head held low and its long nose forward, in a red scarf knotted at the throat with a striped end.

Three pine trees of different heights on a snowdrift, with snow lying along every row of branches.

A tree-top angel in a cream gown edged in gold, with pale blue wings, a gold halo, closed eyes and a star held in both hands.

A moose head front-on, with broad flat antlers strung with red, gold, blue and green bulbs, a long dark muzzle and wide ears.

A red Christmas sweater knitted with a tree and two snowflakes, zigzag and dot rows, striped sleeves and green ribbing.

A round red bauble, a long blue drop and a green onion dome hanging at three heights from a fir branch, with gold caps.

A round peppermint, eight red stripes swirling on white, in a clear wrapper twisted shut at both ends.

Two flat five-point stars that slot together at right angles into a star that stands out in 3D, 78 mm across each way. The hanging star is slotted up from the notch between its lower points and hangs from a 4 mm hole in the loop above its top point; the plain star is slotted down from its top point.

Two flat six-arm snowflakes that slot together at right angles into a snowflake that stands out in 3D, 78 mm across each way. The hanging snowflake is slotted up from its bottom arm and hangs from a 4 mm hole in the loop above its top arm; the plain one is slotted down from its top arm.

Two flat discs, each with a cap and six star-shaped windows, that slot together at right angles into a ball that stands out in 3D, 78 mm across each way. The hanging disc is slotted up from its bottom edge and hangs from a 4 mm hole in the loop above its cap; the plain disc is slotted down from the top of its cap.

Two flat trees that slot together at right angles into a tree that stands out in 3D, 70 mm across each way. The starred tree is slotted up from its trunk and hangs from a 4 mm hole in the star; the plain tree is slotted down from its tip.

Mary kneeling at the manger and Joseph standing with his staff, in navy silhouette, with the swaddled baby on a gold halo in the hay, under a tall gold star.

A front-on young goat with short gray horns, long ears that droop to the sides, a white blaze and beard, and amber eyes with the flat pupils goats have.

A red envelope that folds up and holds money, 90 × 165 mm: a US bill slides in flat, unfolded. A gold border, a plum blossom seal and a coin with a square hole glue on the front.

The classic paper lantern: a red sheet with 18 slits rolled round a gold lining, so its 19 strips bow out and the gold shows between them. Its body is 130 mm tall, with the handle arching above it.

A dark gray cat sitting side-on with a white bib, a red collar and a gold bell, its tail curled round in front of it.

A friendly dog sitting face-on with floppy brown ears, its tongue out, a blue collar and a heart-shaped tag.

A terracotta clay diya with a pinched spout, a gold band and a row of dots, its flame lit from the wick at the spout.

A round rangoli in rings: a scalloped berry border with a dot in each scallop, a gold band of dots, an eight-petal orange lotus with a green leaf between each petal and a small flower at the heart.

A door hanging of marigolds: a garland along the top with long mango leaves, and five strings of ruffled orange and gold flowers, each ending in a little bell.

A round red paper lantern with gold ribs, gold caps and a hanging loop, and a red tassel under a gold knot.

A flat picture of a tall red lucky-money envelope, for a card front or a decal: a gold border, a darker flap closed with a gold seal and a plum blossom, and a gold coin with a square hole below.

A dark plum branch reaching up and across, with nine pink five-petal blossoms, deep red centers ringed with gold, and three teardrop buds in red cups.

Thankful and Blessed in a rust script with GRATEFUL in tall brown capitals between them and a small orange maple leaf at each side, for a shirt, a mug or a Thanksgiving sign.

Happy in a bold rust script over THANKSGIVING in tall brown capitals, with an orange maple leaf at each side of Happy, for a door sign, a table runner or a shirt.

Happy in a bold gold script over DIWALI in sturdy slab capitals, set between two lit clay diyas whose flames lean in toward the words.

FESTIVAL OF in small spaced capitals over Lights in a big gold script, above a row of three lit clay diyas, the middle one larger, for a Diwali card, a shirt or a door sign.

Happy in a bold gold script over LUNAR NEW YEAR in tall red capitals, between two red paper lanterns with gold caps and tassels.

Happy in a rounded red script over HOLIDAYS in tall green capitals, with a holly sprig and its berries at each side of Happy, for a card, a door sign or a gift bag.

Happy in a bold script over RETIREMENT in tall capitals, with a gold sparkle at each end, for a party banner, card or cake topper.

OFFICIALLY in small spaced capitals between two gold rules and stars, over Retired in a big bold script, for a shirt, mug or party sign.

Happy in a flowing script over ANNIVERSARY in tall capitals, under a pair of linked wedding rings, for a card, cake topper or banner.

OUR FIRST in small capitals over Home in a swashy script, beside a little house with a heart window, for a housewarming sign or card.

A vintage blue pickup with rounded fenders and chrome bumpers, its bed loaded with orange and gold pumpkins for fall.

A friendly scarecrow on his post: straw hat, burlap face with button eyes and a stitched smile, a checked shirt with a blue patch, and straw at the cuffs.

A round wreath of autumn leaves in orange, rust and gold, with acorns and a rust bow at the bottom.

A Christmas gnome with a tall red hat pulled over his eyes, a round nose and a long gray beard, with a sprig of mistletoe on the hat.

A vintage red pickup with rounded fenders, a chrome grille and bumpers, bringing the Christmas tree home in the back, with a wreath on the door.

Santa’s face under a red hat with a white cuff and pom-pom: rosy nose and cheeks, a bushy moustache and a full white beard.

A gingerbread house with a chocolate roof edged in white icing, gumdrops along the top, an iced door frame and two lit windows.

A wooden nutcracker soldier standing to attention: tall black hat with a gold band, white hair and beard, a mouth full of teeth, red jacket with gold buttons, white gloves and black boots.

A red sleigh on a gold runner that curls up at the front, piled with wrapped presents in green, blue and gold, each tied with a red ribbon.

The outline of Alabama, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Alaska, in four separate pieces, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Arizona, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Arkansas, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of California, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Colorado, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Connecticut, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Delaware, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Florida, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Georgia, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Hawaii, its eight main islands each a separate piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Idaho, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Illinois, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Indiana, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Iowa, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Kansas, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Kentucky, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Louisiana, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Maine, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Maryland, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Massachusetts, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Michigan, the Upper and Lower Peninsulas as two pieces, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Minnesota, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Mississippi, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Missouri, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Montana, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Nebraska, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Nevada, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of New Hampshire, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of New Jersey, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of New Mexico, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of New York, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of North Carolina, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of North Dakota, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Ohio, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Oklahoma, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Oregon, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Pennsylvania, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Rhode Island, the mainland and Block Island as two pieces, with a red heart over its widest part; drop the heart for a plain outline.

The outline of South Carolina, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of South Dakota, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Tennessee, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Texas, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Utah, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Vermont, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Virginia, the mainland and the Eastern Shore as two pieces, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Washington, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Washington, DC, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of West Virginia, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Wisconsin, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

The outline of Wyoming, in one piece, with a red heart over its widest part; drop the heart for a plain outline.

A round glass flask with a cork, half full of green potion with bubbles rising and a shine on the glass.

A short purple candle with cream wax dripping from its rim, a tall flame and an old chamberstick holder with a ring handle.

A pointed witch boot with a high heel, a long curled toe and a gold buckle, on a leg in a purple and cream striped stocking.

A full round web of eight spokes and sagging rings, with a little spider resting near the bottom.

Three pumpkins stacked from big to small, orange, cream and rust, each with its own lobes, a stem on top and a curling vine.

An old iron lantern with a hanging ring, a peaked cap and glowing glass round a candle flame.

A round black cat face with tall pointed ears, big golden eyes, a pink nose and white whiskers.

A black raven perched side-on on a pointed fence post, with a sharp beak and one golden eye.

A thick closed spell book with corner guards, a crescent moon and stars on the cover and a ribbon bookmark.

A glowing lilac crystal ball with sparkles inside, resting on a carved wooden stand.

A tall and a short toadstool side by side, with red caps, white spots and pale stalks in a tuft of grass.

A little ghost rising out of a hollow pumpkin, its arms resting on the lobed rim.

A waving ghost with a round open mouth, rosy cheeks and a lilac shadow layer behind it.

A bat with scalloped wings spread wide and two small golden eyes.

A ribbed pumpkin with triangle eyes, a toothy grin and a curled stem with one leaf.

A tall bent-tip witch hat with a wide brim, a golden band and a square buckle.

A black cat sitting tall with its tail curled round, golden eyes and a pink nose.

A single piece of candy corn in three stacked bands: yellow base, orange middle, white tip.

A round-bodied spider dropping on its thread, with eight bent legs and two white eyes.

A quarter web for a window or frame corner: seven spokes and five sagging rings in one piece.

A crooked house with a pointed turret, a chimney and glowing golden windows.

A round cauldron on short legs with green potion bubbling over the rim and three flames burning beneath.

A round cartoon skull with big eye sockets, a heart-shaped nose and a row of chunky square teeth.

A wrapped mummy head with wide crossing bandages and a gap for two wide eyes.

A crooked broom with a long handle, tied straw bristles and a terracotta binding.

A big golden crescent moon with three small bats flying across it.

A round-topped gray tombstone carved with RIP, a crack down one side, standing in a tuft of grass.

A black cat with its back arched high, fur bristling, its tail curled up in an S and golden eyes.

A trick-or-treat pail shaped like a smiling pumpkin, with a curved handle and candy peeking out.

A round sweet in a twist wrapper, striped in orange and cream.

A leafless tree with a gnarled trunk and twisting branches that taper to points, on a small mound.

A friendly purple monster with one big eye, two horns, a fang grin and stubby arms.

A round brown owl with big golden eyes and ear tufts, perched on a short branch.

Three small ghosts in a row, each with a different face, for a banner, shirt or window.

A round turkey facing forward with a three-color fan of tail feathers, a gold beak and a red wattle.

A five-lobed maple leaf in rust and orange with cut veins and a short stem.

A long oak leaf with rounded lobes in mustard, with a darker center vein and stem.

A plump acorn with a textured brown cap and a little stalk.

A wide ribbed pumpkin with a curved stem and a curling vine with one leaf.

A shiny red apple with a brown stalk, a green leaf and a soft highlight.

A wedge of pumpkin pie with a fluted crust and a swirl of whipped cream on top.

A big sunflower with two rings of golden petals, a seed-dotted brown center, a stem and two leaves.

An ear of corn with rows of kernels and sage-green husk leaves opening around it.

A tall and a short toadstool with red caps, cream spots and pale stems.

Three ears of wheat with long stalks, tied in the middle with a terracotta bow.

A layered pinecone with overlapping rows of rounded scales and a short twig.

A maple, an oak and a birch leaf drifting down together on a diagonal, in rust, mustard and orange.

A three-tier tree with a gold star, red and gold baubles and a brown trunk.

A three-ball snowman in a top hat and red scarf, with a carrot nose and stick arms.

A front-facing reindeer with branching antlers, soft ears, a pale muzzle and a dark nose.

A red stocking with a fluffy cream cuff, green heel and toe patches and a hanging loop.

A smiling gingerbread man with white icing squiggles at his wrists and ankles and three red buttons.

A round red bauble with a cream zigzag band, a gold cap and a hanging loop.

A hooked candy cane with red and white diagonal stripes.

A round wreath of holly leaves with red berries and a big bow at the bottom.

Two spiky holly leaves with a cluster of three red berries.

A red knitted mitten with a cream ribbed cuff and a small heart on the back.

A square gift box with a lid, a crossing ribbon and a looped bow on top.

A floppy red Santa hat with a white fur cuff and a round pom-pom.

A red poinsettia with eight pointed bracts, green leaves behind and a gold center.

A round navy penguin with a white face and belly, orange beak and feet, and a striped scarf.

A swooping wire with six bulbs in red, gold, green and blue.

A glass snow globe on a wooden base with a little pine tree and falling snow inside.

A red mug of hot cocoa topped with marshmallows, with three curls of steam.

A shaggy ginger highland cow with a fringe over its eyes, long cream horns and a pink nose.

A front-on fox face with tall pointed ears, a cream muzzle and cheek tufts, and a black nose.

A round brown bear face with cupped ears, a pale muzzle and a little smile.

A happy dog face with long dark floppy ears, a white muzzle and its tongue out.

A gray kitten face with pink inner ears, green eyes, a pink nose and whiskers.

A symmetrical butterfly with rounded upper and lower wings, cream spots and curled antennae.

A round striped bumble bee with see-through wings, two antennae and a little stinger.

A rounded fish swimming left, with a forked tail, striped body and three bubbles.

A smiling blue whale with a pale belly, a raised tail and a spray of water from its blowhole.

A sea turtle seen from above, with a patterned shell, four flippers and a little head.

A friendly long-necked dinosaur with a round body, a curling tail and spots along its back.

A white unicorn in profile with a gold spiral horn, a lilac and pink mane, a pointed ear and a sleepy eye.

A plump hen side-on with a red comb and wattle, a scalloped wing, a fanned tail and little yellow feet.

A white bunny face with tall pink-lined ears, rosy cheeks, a little nose and whiskers.

A front-on buck’s head with branching antlers, tall ears, a cream muzzle and a black nose.

A horse’s head in profile with an arched neck, a flowing dark mane, a white blaze and a soft muzzle.

A red cardinal with its pointed crest and black face mask, perched on a branch with two green leaves.

A round ladybug seen from above: red wing cases with six black spots, a black head with two white eyes and curled antennae.

A dog or cat paw print: one rounded pad and four oval toe beans, five pieces spaced to cut cleanly.

A long-bodied dachshund standing side-on, with short legs, a long nose and a floppy dark ear.

A green hummingbird hovering with its wings raised, its long beak in the mouth of a rose-red trumpet flower on a leafy stem.

A pink flamingo standing on one leg, the other folded up, with an S-shaped neck and a bent black-tipped beak.

A single tulip with a three-petal red cup, a long stem and two curving leaves.

A full rose seen from the side, built from three petal layers, with a stem and two leaves.

Three white daisies with gold centers on crossing stems, one large and two small.

A loose bunch of wildflowers: a poppy, cornflowers, sprigs of buds and grasses, tied with twine.

An open ring of leafy sprigs with blush roses and gold berries, with space in the middle for a name or date.

A split monstera leaf with its natural holes and slits, on a short stem.

A tall cactus with two arms and a pink flower, in a terracotta pot.

Three lavender stems with tapering heads of tiny purple buds.

A curving fern frond with paired leaflets that shrink toward the tip.

A short branch with two lemons, glossy leaves and a white blossom.

A big Easter egg with a mint zigzag band, a lilac stripe and a row of dots.

A gray bunny sitting side-on with tall ears, a round haunch, a long back foot and a fluffy white tail.

A yellow chick peeping out of a cracked egg, wearing the top of the shell as a hat.

A red heart pierced by an arrow with a gold head and feathered end.

A pink envelope with its flap sealed by a red heart.

A three-leaf shamrock made of heart-shaped leaves, with a curved stem.

A five-band rainbow arching between two puffy clouds.

A black cauldron overflowing with gold coins, with a shamrock on its side.

A heart with a navy starry corner and red and cream stripes inside a red border, for the Fourth of July.

A firework bursting from one center: twelve long red rays over a gold twelve-point star, with a navy spark at the heart.

A mortarboard cap seen at an angle, with a gold tassel hanging from the button.

A rolled diploma tied with a red ribbon bow, set at a slant.

A short-sleeved baby bodysuit with snap dots and a small heart on the chest.

A round baby rattle with a star on it, a striped band and a ring handle.

A two-tier birthday cake with dripping icing, sprinkles and three lit candles.

Three round balloons in rose, gold and blue, with knotted strings tied together.

A cone party hat with diagonal stripes, a pom-pom on top and a scalloped brim.

Two interlocking rings, one plain and one with a sparkling stone.

A three-tier white cake with pearl borders and a small heart on top.

Two bubbly flutes clinking together with a burst of sparkle above them.

A little house with a peaked roof, a chimney, a door and a heart-shaped window, for a new home.

A white dove in flight, one wing raised with feathered tips, carrying an olive sprig in its beak.

A looped awareness ribbon with crossed tails; cut it in the color of your cause.

A plain Latin cross with soft rays behind it.

A red apple beside a yellow pencil, for teacher gifts and classroom labels.

A side-on yellow school bus with a row of windows, a black stripe and two wheels.

A plump orange carrot with ridges and a leafy green top, for Easter treat bags and spring signs.

A woven basket with a tall handle and three patterned eggs peeking over the rim.

A chunky candy heart with a scalloped inner border, ready for your own two-word message.

A shiny heart balloon with a knot and a curly ribbon.

A gold horseshoe, open end up for luck, with nail holes and a small shamrock.

A tall green top hat seen from just above, with a black band and gold buckle, and a dark green shamrock on the crown.

A three-stripe ice pop in red, cream and blue on a wooden stick, with a bite taken out.

A rippling stars and stripes flag on a pole, with seven red stripes and a starry blue corner.

Three stacked books in different colors with an apple on top, for teachers and graduates.

A baby bottle with a soft teat, a screw ring, measuring marks and a heart.

A round-hooded baby carriage with spoked wheels and a curved handle.

A front-on pacifier: a wide oval shield with two air holes, a round button and a ring handle, the teat peeking below.

A gold Hanukkah menorah with nested arms: eight blue candles in a level row and the shamash raised in the middle, all lit.

A blue dreidel standing on its point, with a gold handle and the letter shin on its front face.

A Star of David drawn plainly: two overlapping blue triangles cut as one open frame, on a pale blue shadow.

A wooden kinara holding the seven Kwanzaa candles, all lit: three red on the left, the black one in the middle and three green on the right.

Two plump birds on a branch, a pink one and a rose one, leaning in beak to beak under a small red heart.

A sitting teddy bear hugging a big red heart, with round ears, a pale muzzle and paw pads.

A heart-shaped lollipop with a pink heart inside a rose one, on a stick tied with a red bow.

A dark green bottle tipped to the right, its cork flying off on a rising chain of bubbles, with a cream label and gold foil.

A round alarm clock with twin bells, both hands on twelve and stars around it: the countdown to New Year.

A brown football at a slant, with white end stripes and stitched laces.

A volleyball with three matching pairs of curved navy stripes on white, inside a dark rim.

A white baseball with two curved red stitch lines.

An orange basketball with its four black seam lines.

A fish caught by the lip on a hook and line, with a forked tail, a fanned back fin and a pale belly.

A camping tent with its door open, between two pine trees under a crescent moon.

A round badge with snowy peaks, a sun and a pine forest along the bottom.

A takeaway coffee cup with a lid, a sleeve and a heart on the side.

A wooden rolling pin crossed with a wire whisk, for a baker’s apron or recipe box.

A ball of yarn with wrapped strands and two knitting needles pushed through it.

A round-bellied watering can with a long spout, a handle and three drops.

An acoustic guitar at a slant, with a round sound hole and a bridge.

A classic bicycle side-on, with spoked wheels, a basket and a curved handlebar.

A cheerleading megaphone tilted up, with a contrast band, a handle, its open bell and three stars bursting out.

The word Boo! in round, chunky letters with a small ghost peeking over the B.

Trick or Treat in dripping spooky letters on two centered lines, with a bat flying above.

Happy Halloween in a bold script over two lines, with a black shadow layer and two bats.

Spooky in purple dripping letters over SEASON in tall clean capitals.

Stay Spooky in a brushy hand-lettered script, with three small stars.

Hey Boo in a rounded retro script with a heart-shaped dot, for a cute Halloween shirt.

Thankful in a flowing script with a maple leaf above the letters.

Grateful in a bold script with a two-color shadow for layered vinyl or card.

Gobble Gobble stacked in chunky rounded letters with a little turkey.

Happy in script over FALL Y’ALL in heavy slab letters, with a pumpkin dotting the line.

Pumpkin Spice in a bold script on two lines, for a mug or a cozy sweatshirt.

Give Thanks in a swashy vintage script on two lines.

GATHER in sturdy slab capitals under a maple leaf, for a farmhouse sign or table runner.

Merry in a bold script over AND BRIGHT in tall capitals, with gold sparkles.

HO HO HO in tall red capitals with a dark green shadow, for a Santa sack or a holiday shirt.

Joy in a swash script with a holly sprig tucked against the y.

Merry Christmas in a rounded script on two lines, with a star above.

Let it snow in a brushy script under an arc of three six-armed snowflakes.

Believe in a bold script with a gold star over the i.

NOEL in sturdy slab capitals over a holly sprig with red berries.

Cozy in a rounded script over SEASON in tall capitals, for mugs and sweatshirts.

Be Mine in a rounded script with a red heart beside it.

XOXO with hearts for the O’s: tall rose capitals and red hearts, for cards, mugs and shirts.

Love in a bold red script with a pink shadow and a small heart resting on the e.

Happy Easter in a swashy script on two lines, with a patterned egg.

Hello Spring in a rounded script with a tulip at the end.

Lucky in a bold green script with a shamrock beside the y.

RED WHITE in slab capitals over and Blue in a brush script, with three stars.

Happy in a swashy script over HANUKKAH in sturdy slab capitals, with a Star of David on each side of Happy.

Happy in a swashy script over NEW YEAR in tall capitals, with sparkles.

Cheers in a rounded script with a gold shadow, for a party sign or glass decal.

Home Sweet Home in a swashy script on three lines, with a small heart.

Welcome in a bold script over TO OUR HOME in small capitals, for a door sign or porch board.

MAMA over BEAR in heavy slab capitals, for a shirt, mug or tote.

Mama in a rounded script with a small heart, for a shirt, mug or tote.

BEST DAD in tall capitals with Ever in a brush script underneath.

GONE over FISHING in sturdy slab capitals, with a leaping fish beside GONE.

TEACHER in chunky letters, of tiny in a red script and HUMANS in chunky letters again.

Happy in script over BIRTHDAY in chunky letters, with three balloons on their strings.

Oh Baby in a soft rounded script for a baby shower sign or favor.

Just Married in a flowing script on two lines, with two linked hearts.

Mr and Mrs in sturdy slab letters with a gold script ampersand between them, for chair signs and cake toppers.

Be kind in a rounded script with a small heart, for a classroom, shirt or water bottle.

Coffee time in a brush script with a takeaway cup, for a mug or a coffee corner sign.

A writing face with two fold-back tabs for a basket rim. The tabs fold around the rim and fasten to the back; they don’t grip on their own. The tabs fit a rim up to 25 mm thick (the distance between the two scores).

A tag base and a separate branching snowflake overlay, arranged side by side for cutting. Center the snowflake on the tag when assembling.

Fits an A2 card (4¼ × 5½ in, 108 × 140 mm). Finished envelope 4⅜ × 5¾ in (111 × 146 mm). Compare the pocket with your card, including raised layers.

A folded sleeve for flat gift tags, with bottom flaps and an open top. Inside, it is 60 × 10 mm; thick card makes it a little smaller.

A six-arm snowflake with 2 branch pairs per arm, 3.2 mm-wide arms and straight tips, measuring 80 × 90 mm. Tie thread around an arm; there is no separate hanging hole.

A six-arm snowflake with 3 branch pairs per arm, 3.4 mm-wide arms and straight tips, measuring 84 × 90 mm. Tie thread around an arm; there is no separate hanging hole.

A six-arm snowflake with 1 branch pair per arm, 3.6 mm-wide arms and straight tips, measuring 83 × 90 mm. Tie thread around an arm; there is no separate hanging hole.

A six-arm snowflake with 2 branch pairs per arm, 3.8 mm-wide arms and round tips, measuring 84 × 96 mm. Tie thread around an arm; there is no separate hanging hole.

A six-arm snowflake with 3 branch pairs per arm, 4 mm-wide arms and straight tips, measuring 86 × 90 mm. Tie thread around an arm; there is no separate hanging hole.

A six-arm snowflake with 2 branch pairs per arm, 4.2 mm-wide arms and round tips, measuring 84 × 96 mm. Tie thread around an arm; there is no separate hanging hole.

A tree base and smaller tree overlay, arranged side by side. Center the overlay on the base with its tip about 25 mm below the base’s tip: a thin border of the base then shows all round, the overlay’s trunk ends 5.5 mm above the base’s, and the hanging hole stays clear.

A ring with three holly leaves and three berry circles arranged inside its open center for cutting. Move the separate pieces onto the ring when assembling.

Bridged alphabet stencil, 232 × 168 mm. An outlined lettering stencil with 2 mm vertical bridges through characters with enclosed centers. Those centers remain attached to the sheet; characters without enclosed centers keep their complete outlines.

Bridged numeral stencil, 168 × 88 mm. An outlined lettering stencil with 2 mm vertical bridges through characters with enclosed centers. Those centers remain attached to the sheet; characters without enclosed centers keep their complete outlines.

A–Z outlines with a 10 mm open band for separate wording. Each letter is split into upper and lower pieces; bars and a name are not included.

Two outlined initials alternate over and under at their overlaps. Test-cut the crossing gaps in your material first; thin card can tear there.

A connected spoon silhouette with an oval bowl and long handle.

A fork silhouette with four tines, open slots and a connected handle.

A cup with an open handle and a separate saucer. Keep their relative positions for the arrangement shown.

A single connected sign face and pointed stake. For outdoors, cut it from plastic sheet or outdoor vinyl.

A rounded label with two slots for a separate tie. Measure your scoop handle and tie the tag on; it doesn’t clip on by itself.

An original rectangle tag with a central hanging hole. Add wording away from the hole.

An original oval tag with a central hanging hole. Add wording away from the hole.

An original house tag with a central hanging hole. Add wording away from the hole.

An original star tag with a central hanging hole. Add wording away from the hole.

An original heart tag with a central hanging hole. Add wording away from the hole.

An original bauble tag with a central hanging hole. Add wording away from the hole.

An original mitten tag with a central hanging hole. Add wording away from the hole.

An original tree tag with a central hanging hole. Add wording away from the hole.

An original starburst tag with a central hanging hole. Add wording away from the hole.

An original pumpkin tag with a central hanging hole. Add wording away from the hole.

An original bunny tag with a central hanging hole. Add wording away from the hole.

An original egg tag with a central hanging hole. Add wording away from the hole.

An original gift tag with a central hanging hole. Add wording away from the hole.

An original bell tag with a central hanging hole. Add wording away from the hole.

An original cloud tag with a central hanging hole. Add wording away from the hole.

An original flag tag with a central hanging hole. Add wording away from the hole.

An original bracket gift tag with an enclosed hanging hole.

An original leaf gift tag with an enclosed hanging hole.

An original tab gift tag with an enclosed hanging hole.

Side fold at 108 mm. Folded: 108 × 140 mm.

Side fold at 127 mm. Folded: 127 × 178 mm.

Side fold at 127 mm. Folded: 127 × 127 mm.

4 panels, each 80 × 120 mm, separated by score guides. Fold at the guides; this is a blank base without decoration.

2 panels, each 100 × 90 mm, separated by score guides. Fold at the guides; this is a blank base without decoration.

Small note envelope, 112 × 155 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Large greeting envelope, 160 × 215 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Square envelope, 135 × 135 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Gift card envelope, 90 × 60 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Seed packet envelope, 60 × 95 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Long letter envelope, 225 × 115 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

An aperture frame and matching back. Add your own transparent front and spacer; this file does not set a fill depth.

Three aperture frames and two scored side strips. Mount the frames along matching pleats; finished depth depends on the opened folds.

A separate symmetric V-fold insert with narrow edge tabs. Center it across the fold of your own card, position both tabs symmetrically, then check that the card closes before attaching decoration.

Four equal panels and an 8 mm join tab form an open parallelogram sleeve. Join the tab, flatten the sleeve and attach adjacent panels on opposite sides of a card fold. Check the closing movement before decorating.

Cube favor glue-flap box, 45 × 45 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.

Tall favor glue-flap box, 35 × 80 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.

Tea sachet glue-flap box, 65 × 85 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.

Gift card glue-flap box, 95 × 18 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.

Small jewelry glue-flap box, 55 × 25 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.

Long stationery glue-flap box, 165 × 25 mm. Four side panels with top and bottom glue flaps. Join the side tab, fold the short dust flaps inward, then glue the two full-depth rectangular flaps together at each end. Each major flap covers the opening exactly. Sizes are for thin card; thick card makes it a little smaller inside. The ends glue shut; they don’t tuck in.

Square open tray, 75 × 75 mm. An open tray net without integral glue tabs. Fold the walls up and join the corner seams with your chosen backing strips. The template does not include seam allowance.

Long open tray, 120 × 45 mm. An open tray net without integral glue tabs. Fold the walls up and join the corner seams with your chosen backing strips. The template does not include seam allowance.

Shallow card open tray, 110 × 80 mm. An open tray net without integral glue tabs. Fold the walls up and join the corner seams with your chosen backing strips. The template does not include seam allowance.

Small favor open tray, 50 × 40 mm. An open tray net without integral glue tabs. Fold the walls up and join the corner seams with your chosen backing strips. The template does not include seam allowance.

Matchbox tray and sleeve, 65 × 40 mm. An open tray and a separate wrapping sleeve. The sleeve is 1 mm bigger than the tray on each side, with a 10 mm overlap. Adjust it for your material and joins.

Drawer tray and sleeve, 95 × 65 mm. An open tray and a separate wrapping sleeve. The sleeve is 1 mm bigger than the tray on each side, with a 10 mm overlap. Adjust it for your material and joins.

Square gift envelope box, 80 × 80 mm. Fold the side flaps inward, then the bottom flap; the flaps meet edge to edge without overlapping, so tape the seams. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Fold the four triangles up around the square base. Their side edges meet at the apex. Join adjoining edges with backing strips; glue tabs are not included.

An open square tapered container, 50 mm at the base and 85 mm at the rim, with 95 mm tall. Fold the four sides up and join their edges with backing strips; this net has no integral glue tabs.

An open square tapered container, 65 mm at the base and 90 mm at the rim, with 65 mm tall. Fold the four sides up and join their edges with backing strips; this net has no integral glue tabs.

Treat cone, 70 × 90 mm. Bring the two straight edges together to form the cone. Use a separate backing strip at the seam; this exact sector includes no overlap. The rim remains open.

Hexagonal box base, 80 × 69 mm. Fold six rectangular walls around the hexagonal base. Join the corners with separate backing strips. For a lid, allow clearance for your measured material thickness; no universal clearance is assumed.

Hexagonal lid blank, 84 × 73 mm. Fold six rectangular walls around the hexagonal base. Join the corners with separate backing strips. For a lid, allow clearance for your measured material thickness; no universal clearance is assumed.

Curve the two broad faces into a sleeve, join the narrow side tab and fold the curved end flaps inward. Flat face width is 65 mm and central length is 100 mm; the formed thickness and usable finished length depend on the bend.

Milk carton gift box, 45 × 45 mm. Fold four body panels into a tube and join the side tab. Close the short bottom flaps with a separate backing square. Bring the two broad top flaps together over the triangular ends; glue or clip the roof seam. No handle or locking catch is supplied.

Gable gift carton, 75 × 45 mm. Fold four body panels into a tube and join the side tab. Close the short bottom flaps with a separate backing square. Bring the two broad top flaps together over the triangular ends; glue or clip the roof seam. No handle or locking catch is supplied.

Explosion box base, 65 × 65 mm. An open tray net without integral glue tabs. Fold the walls up and join the corner seams with your chosen backing strips. The template does not include seam allowance.

Easter basket base, 80 × 65 mm. An open tray net without integral glue tabs. Fold the walls up and join the corner seams with your chosen backing strips. The template does not include seam allowance.

Four body panels form a 60 × 40 × 70 mm box. The back lid crosses the 40 mm depth; its 20 mm tongue enters the front slit. Fold the lid tongue, join the side seam and glue the bottom flaps. For thick card, cut the slit a little wider than the tongue.

A separate tray base and shallow lid. The lid is 2 mm wider and deeper than the base so it slides on; add more for thick card.

A pennant banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

A swallowtail banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

A rectangle banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

A scallop banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

A circle banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

A heart banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

A star banner panel, 86 × 100 mm, with two holes for the string. Keep the holes clear of added lettering.

An arch banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

A leaf banner panel, 90 × 110 mm, with two holes for the string. Keep the holes clear of added lettering.

Outlined A–Z and 0–9 for adding wording to banner panels. Each letter is its own piece, with its holes cut out; it isn’t a stencil.

An outlined number 0, 40 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 1, 34 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 2, 35 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 3, 36 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 4, 40 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 5, 36 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 6, 39 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 7, 38 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 8, 40 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

An outlined number 9, 37 × 60 mm, without a support stem. Each number is one piece, with any holes cut out. Add a paper or wooden stick so it doesn’t touch the cake.

A geometric decorative wrapper for a 55 mm top, 55 mm bottom and 40 mm height, with 8 mm overlap. Measure your cupcake liner first; the wrapper goes around the outside of the liner, not against the cake.

A geometric decorative wrapper for a 65 mm top, 45 mm bottom and 40 mm height, with 8 mm overlap. Measure your cupcake liner first; the wrapper goes around the outside of the liner, not against the cake.

A geometric decorative wrapper for a 75 mm top, 50 mm bottom and 42 mm height, with 8 mm overlap. Measure your cupcake liner first; the wrapper goes around the outside of the liner, not against the cake.

A geometric decorative wrapper for a 68 mm top, 45 mm bottom and 50 mm height, with 8 mm overlap. Measure your cupcake liner first; the wrapper goes around the outside of the liner, not against the cake.

A connected star face and paper stem. Add a paper or wooden stick so it doesn’t touch the cake.

Tree hanging ornament, 65 × 90 mm. A flat hanging ornament with a central hole. Resize the shape and its hole together.

Bauble hanging ornament, 63 × 85 mm. A flat hanging ornament with a central hole. Resize the shape and its hole together.

Stocking hanging ornament, 65 × 90 mm. A flat hanging ornament with a central hole. Resize the shape and its hole together.

Six arms around a central hanging hole, 80 × 69 mm.

Seven arms around a central hanging hole, 76 × 78 mm.

Eight arms around a central hanging hole, 80 × 80 mm.

Nine arms around a central hanging hole, 78 × 79 mm.

Ten arms around a central hanging hole, 80 × 76 mm.

Eleven arms around a central hanging hole, 78 × 79 mm.

Geometric cone ornament net, 50 × 50 mm. Bring the two straight edges together to form the cone. Use a separate backing strip at the seam; this exact sector includes no overlap. The rim remains open.

Rows of round dots on a 132 × 132 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A lattice of diamonds on a 108 × 108 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A honeycomb of hexagons on a 108 × 84 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A grid of small squares on a 132 × 108 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

Rows of leaves on a 108 × 84 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

Rows of petals on a 108 × 84 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

Rows of stars on a 108 × 84 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

Rows of small suns on an 84 × 84 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A border strip of hearts on a 156 × 36 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A border strip of triangles on a 180 × 36 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A border strip of arches on a 156 × 36 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A border strip of starbursts on a 132 × 36 mm sheet. Cut the outer sheet and openings; keep the surrounding sheet.

A circle frame, 90 × 90 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

A circle base, 90 × 90 mm, with a separate name plate. Place the name plate across the base in your editor; the pieces arrive separated.

An oval frame, 110 × 80 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

An oval base, 110 × 80 mm, with a separate name plate. Place the name plate across the base in your editor; the pieces arrive separated.

An arch frame, 85 × 110 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

A shield frame, 85 × 105 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

A shield base, 85 × 105 mm, with a separate name plate. Place the name plate across the base in your editor; the pieces arrive separated.

A scallop frame, 100 × 100 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

A scallop base, 100 × 100 mm, with a separate name plate. Place the name plate across the base in your editor; the pieces arrive separated.

A hexagon frame, 91 × 95 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

A hexagon base, 105 × 95 mm, with a separate name plate. Place the name plate across the base in your editor; the pieces arrive separated.

A diamond frame, 85 × 110 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

A diamond base, 85 × 110 mm, with a separate name plate. Place the name plate across the base in your editor; the pieces arrive separated.

A bracket frame, 110 × 75 mm, with an open center for your initials. The enclosed center is removed; lettering is not included.

A bracket base, 110 × 75 mm, with a separate name plate. Place the name plate across the base in your editor; the pieces arrive separated.

Laurel leaf monogram surround, 108 × 98 mm. Separate leaf pieces surround an open center for your initials. Keep their relative positions when transferring; the leaves are not welded into one ring.

Wreath leaf monogram surround, 109 × 108 mm. Separate leaf pieces surround an open center for your initials. Keep their relative positions when transferring; the leaves are not welded into one ring.

Vine leaf monogram surround, 108 × 85 mm. Separate leaf pieces surround an open center for your initials. Keep their relative positions when transferring; the leaves are not welded into one ring.

Three outlined initials overlap in separate groups. The letters keep their own outlines; weld them in your software if you want one piece.

An arch sign, 140 × 180 mm, with an enclosed hanging opening. Check that its placement suits your hardware.

A rectangle sign, 210 × 140 mm, with an enclosed hanging opening. Check that its placement suits your hardware.

A ribbon sign, 210 × 110 mm, with an enclosed hanging opening. Check that its placement suits your hardware.

A house sign, 160 × 180 mm, with an enclosed hanging opening. Check that its placement suits your hardware.

An oval sign, 200 × 140 mm, with an enclosed hanging opening. Check that its placement suits your hardware.

A shield sign, 150 × 185 mm, with an enclosed hanging opening. Check that its placement suits your hardware.

A teardrop sign face with a hanging opening. Check the hole position and size against your own hardware.

A house-shaped face and a separate folded easel support. The stand is a paper construction; it does not specify a material thickness for a rigid slot.

Arch layered word base, 160 × 200 mm. A full back plate and smaller overlay for your own wording. The pieces arrive side by side; center the smaller plate on the back.

Long layered word base, 240 × 85 mm. A full back plate and smaller overlay for your own wording. The pieces arrive side by side; center the smaller plate on the back.

Oval layered word base, 210 × 140 mm. A full back plate and smaller overlay for your own wording. The pieces arrive side by side; center the smaller plate on the back.

Shamrock leaf decal, 51 × 61 mm. A clover silhouette in one connected piece.

Four-leaf clover decal, 62 × 62 mm. A clover silhouette in one connected piece.

An original horned-horse profile with a mane edge.

Square keychain blank, 45 × 45 mm. A small blank with a central attachment hole. Measure your own hardware.

Hexagon keychain blank, 39 × 45 mm. A small blank with a central attachment hole. Measure your own hardware.

Octagon keychain blank, 45 × 45 mm. A small blank with a central attachment hole. Measure your own hardware.

Scallop keychain blank, 45 × 45 mm. A small blank with a central attachment hole. Measure your own hardware.

Fold the side triangles toward the center to form a corner sleeve. Join the overlapping flap edges without closing the page pocket.

Rounded strip bookmark, 38 × 150 mm. A long bookmark blank with a top hole for your own cord or tassel.

Arch strip bookmark, 38 × 150 mm. A long bookmark blank with a top hole for your own cord or tassel.

Flag strip bookmark, 38 × 150 mm. A long bookmark blank with a top hole for your own cord or tassel.

Shield strip bookmark, 38 × 150 mm. A long bookmark blank with a top hole for your own cord or tassel.

A geometric example for 60 mm top diameter, 60 mm bottom diameter and 70 mm vertical height, with 8 mm overlap. Measure your own cup and make yours in the cup wrap generator.

A geometric example for 75 mm top diameter, 75 mm bottom diameter and 110 mm vertical height, with 0 mm overlap. Measure your own cup and make yours in the cup wrap generator.

A geometric example for 90 mm top diameter, 70 mm bottom diameter and 60 mm vertical height, with 0 mm overlap. Measure your own cup and make yours in the cup wrap generator.

A geometric example for 90 mm top diameter, 60 mm bottom diameter and 100 mm vertical height, with 0 mm overlap. Measure your own cup and make yours in the cup wrap generator.

A geometric example for 90 mm top diameter, 60 mm bottom diameter and 100 mm vertical height, with 6 mm overlap. Measure your own cup and make yours in the cup wrap generator.

A continuous spiral paper strip. Roll from the outer tip and secure the inner end on a separate base; finished diameter depends on how tightly it is rolled.

Dahlia pointed layer, 104 × 104 mm. A connected flower layer. Stack and shape separate copies; the finished flower height and diameter depend on your arrangement.

Peony rounded layer, 104 × 104 mm. A connected flower layer. Stack and shape separate copies; the finished flower height and diameter depend on your arrangement.

Tall lantern botanical panel, 65 × 150 mm. A decorative paper panel with a leaf aperture. It is one decorative panel, not a whole lantern; keep it away from candles and flames.

Wide lantern botanical panel, 95 × 125 mm. A decorative paper panel with a leaf aperture. It is one decorative panel, not a whole lantern; keep it away from candles and flames.

Five petal flower layer, 83 × 86 mm. A connected petal layer with a central attachment opening.

Six petal flower layer, 100 × 88 mm. A connected petal layer with a central attachment opening.

Eight petal flower layer, 110 × 110 mm. A connected petal layer with a central attachment opening.

Planner pocket, 100 × 75 mm. Fold the side flaps inward, then the bottom flap; join only the overlapping flap edges. The top flap closes last. Sizes are for thin paper; thick card makes the pocket a little smaller inside.

Six rectangular label outlines arranged with space between them.

A ruler outline with a 0–140 mm scale. Marks are spaced by 1 mm in the SVG; longer marks identify 5 and 10 mm intervals.

A rounded rectangle label, 76 × 42 mm, in one piece; add your own text.

An arch label, 60 × 62 mm, in one piece; add your own text.

A capsule label, 76 × 42 mm, in one piece; add your own text.

A ticket label, 76 × 42 mm, in one piece; add your own text.

Double-line frame, 76 × 42 mm. Blank base and separate 5 mm border; align the two at their original size.

Layered plaque, 76 × 42 mm. Blank base and separate 5 mm border; align the two at their original size.

A wide capsule label, 100 × 35 mm, in one piece; add your own text.

A wide arch label, 90 × 60 mm, in one piece; add your own text.

A square tab label, 60 × 65 mm, in one piece; add your own text.

A notched rectangle label, 95 × 40 mm, in one piece; add your own text.

Two-line frame, 100 × 40 mm. Blank base and separate 5 mm border; align the two at their original size.

Layered badge, 70 × 50 mm. Blank base and separate 5 mm border; align the two at their original size.

30 × 55 mm tag base.

64 × 28 mm tag base.

Loop-style tie-on blank with an 18 × 4 mm slot at the left edge; use a separate tie.

10 mm neck and 45 × 24 mm flag; fold guide at x=30 mm. This is an adhesive wrap shape without a mechanical closure.

16 mm neck and 55 × 36 mm flag; fold guide at x=32 mm. Adhesive wrap shape without a mechanical closure.

70 × 38 mm tag base.

An arch label, 55 × 60 mm, in one piece; add your own text.

A capsule label, 80 × 30 mm, in one piece; add your own text.

A flag label, 70 × 45 mm, in one piece; add your own text.

Simple solid leaf.

Sprout symbol, 40 × 50 mm. A sprig in one connected piece. Weld the overlapping parts into one shape before cutting.

Connected generic branching root symbol.

Classic, 65 × 70 mm. 44 × 70 mm tag base with a separate 14 × 23 mm accent.

Arch, 44 × 70 mm. 44 × 70 mm tag base.

Ticket, 65 × 70 mm. 44 × 70 mm tag base with a separate 14 × 23 mm accent.

Scallop, 44 × 70 mm. 44 × 70 mm tag base.

Pennant, 65 × 70 mm. 44 × 70 mm tag base with a separate 14 × 23 mm accent.

60 × 60 mm tag base.

Faceted, 65 × 70 mm. 44 × 70 mm tag base with a separate 14 × 23 mm accent.

Botanical, 44 × 70 mm. 44 × 70 mm tag base.

Straight, 100 × 45 mm. Each card is 100 × 90 mm flat; fold it at 45 mm for a 100 × 45 mm face.

Arch, 100 × 45 mm. Each card is 100 × 90 mm flat; fold it at 45 mm for a 100 × 45 mm face.

Botanical edge, 100 × 45 mm. Each card is 100 × 90 mm flat; fold it at 45 mm for a 100 × 45 mm face.

65 × 65 mm window plus a separate 57 × 57 mm inset that sits inside it. The smaller panel sits inside the window, so it needs a backing piece behind it.

Arch, 132 × 75 mm. 65 × 75 mm window plus a separate 57 × 67 mm inset that sits inside it. The smaller panel sits inside the window, so it needs a backing piece behind it.

Rounded rectangle, 132 × 75 mm. 65 × 75 mm window plus a separate 57 × 67 mm inset that sits inside it. The smaller panel sits inside the window, so it needs a backing piece behind it.

Star, 132 × 75 mm. 65 × 75 mm window plus a separate 57 × 67 mm inset that sits inside it. The smaller panel sits inside the window, so it needs a backing piece behind it.

Leaf, 132 × 75 mm. 65 × 75 mm window plus a separate 57 × 67 mm inset that sits inside it. The smaller panel sits inside the window, so it needs a backing piece behind it.

Faceted window, 132 × 75 mm. 65 × 75 mm window plus a separate 57 × 67 mm inset that sits inside it. The smaller panel sits inside the window, so it needs a backing piece behind it.

180 × 24 mm straight band example, with fold guides at x=40, 70, 110 and 140 mm.

Arch plaque, 180 × 74 mm. 180 × 24 mm straight band example, with fold guides at x=40, 70, 110 and 140 mm; separate 46 × 42 mm front plaque.

Ticket plaque, 180 × 74 mm. 180 × 24 mm straight band example, with fold guides at x=40, 70, 110 and 140 mm; separate 46 × 42 mm front plaque.

Leaf plaque, 180 × 74 mm. 180 × 24 mm straight band example, with fold guides at x=40, 70, 110 and 140 mm; separate 46 × 42 mm front plaque.

Star plaque, 180 × 74 mm. 180 × 24 mm straight band example, with fold guides at x=40, 70, 110 and 140 mm; separate 46 × 42 mm front plaque.

70 × 75 mm stylized maple silhouette.

Canvas 64 × 76 mm; one stylized oak silhouette.

45 × 70 mm tag base.

Acorn silhouette with separate cap accent.

35 × 48 mm tag base.

Eight-point star, 64 × 80 mm. 64 × 80 mm hanging base.

Arch, 64 × 80 mm. 64 × 80 mm hanging base.

64 × 64 mm hanging base.

Diamond, 64 × 80 mm. 64 × 80 mm hanging base.

Layered star, 116 × 80 mm. 64 × 80 mm hanging base and separate 42 × 48 mm inset.

Layered arch, 116 × 80 mm. 64 × 80 mm hanging base and separate 42 × 48 mm inset.

Round pumpkin, 70 × 62 mm. Original pumpkin silhouette plus separate oval center panel and stem. Center the panel on the silhouette after cutting.

Tall pumpkin, 52 × 85 mm. Original pumpkin silhouette plus separate oval center panel and stem. Center the panel on the silhouette after cutting.

Three overlapping pumpkin silhouettes arranged as a stack. Weld for one silhouette, or keep separate for three layers.

Solid tapered pumpkin leaf.

A curling vine, 4 mm wide.

Separate round 70 × 62 mm and tall 52 × 85 mm one-layer silhouettes.

Broad rounded solid leaf. Separate 20 × 40 mm optional inset; align at the base center.

Long tapered solid leaf. Separate 14 × 60 mm optional inset; align inside the leaf.

Three-leaf sprig, 48 × 78 mm. A sprig in one connected piece. Weld the overlapping parts into one shape before cutting.

Five-leaf sprig, 55 × 95 mm. A sprig in one connected piece. Weld the overlapping parts into one shape before cutting.

Fern-like frond, 65 × 110 mm. A sprig in one connected piece. Weld the overlapping parts into one shape before cutting.

Two separate connected sprigs, 48 × 90 mm and 48 × 72 mm, for a paired composition.